Loncool acetic silicone is a one-component, acidic, room-temperature-curing silicone sealant with high strength and modulus. It offers excellent resistance to weathering, aging, UV rays, ozone, water, and high and low-temperature conditions. After curing, it exhibits good adhesion to most building materials.
Features and Benefits
Fast cure.
Excellent adhesion to a variety of non-porous substrates.
Long-lasting flexibility.
Resistant to UV rays, extreme temperatures, and aging.
Excellent adhesion, fast curing, mildew-proof and waterproof.
Excellent weather resistance, UV resistance, low VOC, environmental protection.
Applications
Anti-mold sealing in bathrooms, kitchens, laundries, and humid environments.
01
Sealing sanitary ware, bathtubs, shower enclosures, and saunas.
02
Conservatory sealing. Sealing U-shaped glass (U-glass).
03
General-purpose sealing of glass and aluminum-glass frames.
04
Sealing vents and drains.
05
Usage
- Before construction, please clean the surface of the material with acetone or other detergents;
- Make sure that the sealant is in close contact with the substrate;
- Apply the low-viscosity tape to the area to be protected and remove it before the tape cures.
Restrictions
√ Do not apply to untreated absorbent alkaline substrates.
√ Do not apply to metals that may rust or have poor corrosion resistance. The acidic nature of the sealant may cause oxidation of adjacent surfaces.
√ Do not use on oily or oily surfaces, narrow areas, frosted or wet surfaces.
√ Do not use on the surface of materials with a temperature below 4℃ or above 40℃.
√ Do not use in areas of wear or physical damage.
√ Do not contact food surfaces.
Hot Tags: acetic silicone, China acetic silicone manufacturers, suppliers, factory, acetic cure silicone, acetic cure silicone aquarium, acetic silicone sealant, acid cure silicone, sealant acetic, silicone sealant acid
