Loncool neutral cure silicone sealant is a neutral-cure silicone sealant that is UV- and mildew-resistant, will not shrink or crack, and can be used between horizontal and vertical surfaces or any other changes in plane.
Applications
1. Suitable for a variety of substrates, such as tile, porcelain, slate, aluminum, wood, metal, glass, fiberglass, laminate, concrete, PVC and other plastics, and many other common materials.
2. Provides a flexible barrier and strong bond between expansion joints in fixtures, bathtub surrounds, sinks, toilets, vanities, electrical conduit penetrations, roofs, floors, walls, and ceilings.
Instructions
1. Mask both sides of the joint. Remove the tip cap, cut the tip at a 45° angle to the desired diameter, and pierce the seal inside the tube.
2. Place the joint sealant in the caulking gun and apply even pressure until the joint is completely bridged. Sand the joint smooth with a dry sanding tool and immediately remove the masking tape. Before covering the surface with sealant, wipe any sealant from the facing surface with a paper towel.
3. Excess sealant should be removed before curing.
Note
√ It is the user's responsibility to determine the condition and suitability of all surfaces before application.
√ All surfaces must be structurally sound, clean, and free of dust, dirt, oil, grease, water, curing agents, sealants, wax, or any other contaminants that may affect a good bond.
Storage / Shelf Life
- Store in a clean, dry area protected from freezing or heat at temperatures between 10°C and 32°C.
- Unopened cartridges have a shelf life of 12 months from the date of manufacture.
Hot Tags: neutral cure silicone sealant, China neutral cure silicone sealant manufacturers, suppliers, factory, Kitchen Bath Silicone Sealant, low modulus neutral cure, low modulus neutral cure silicone, Neutral Cure Silicone Adhesive, neutral cure silicone rubber, neutral silicone sealant
