To ensure product quality, we recommend that customers clean the surface before application, ensuring it is free of dust, grease, water, and moisture. Ensure that one side of the adhesive is absorbent and firm to ensure a secure bond.
1. Cut the nozzle above the thread line to the desired size and angle (approximately 6mm).
2. Squeeze one or two continuous strips of adhesive onto the back of the surface to be bonded.
3. Allow the adhesive to adhere for at least 2 minutes.
4. Wipe away any excess adhesive with a damp cloth.
5. Depending on the substrate, heavy objects may require support or a fixed fixture.
